BC80 Universal Beam Clamp, Malleable Iron Material - BC800037PL (Options: Plain Carbon Steel, 3/8")
Sku:
BC800037PL
UOM: EA
Sku:
BC800037PL
UOM: EA
Unistrut Buffalo is a division of Eberl Iron Works, Inc.
SKU | BC800037PL |
---|---|
Pack Size | Each |
UOM | EA |
Finish | Plain Carbon Steel |
STANDARD DIMENSIONS
Standard Dimensions for 1-5/8" (41.3 mm) width series channel (Unless otherwise specified in Unistrut General Engineering Catalog):
Hole Diameter: 9/16" (14.3 mm)
Hole Spacing - From End: 13/16" (20.6 mm)
Hole Spacing - On Center: 1-7/8" (47.6 mm)
Width: 1-5/8" (41.3 mm)
Thickness: 1/4" (6.4 mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45
Note: When used for mechanical supports, load capacities of brackets, fittings and other supporting elements should be in compliance with the American Standard Code for Pressure Piping. Clamps are designed to be used with W, M, S & HP Shape beams, Standard C & Misc. MC Channels, Angles & Structural Tees. Clamps must be used in pairs where indicated. For beam clamps with HG finish, standard hardware is EG finish. For optional stainless steel hardware, please contact the factory for availability.
MATERIAL
Fittings, unless noted, are made from hot-rolled, pickled and oiled steel plates, bar, strip or coil, and conform to one or more of the following specifications: ASTM specifications A575, A576, A635, A1011 SS GR 33, A1011 HSLAS GR 45 or A36. All fittings meet or exceed physical properties of ASTM A1011 GR 33. The pickling of the steel produces a smooth surface free from scale. Many fittings are also available in stainless steel, aluminum and fiberglass. Consult factory for ordering information.
FINISHES
Fittings are available in:
*** Perma Green finish is a commercial grade finish, and as such scuffs and scratch marks are to be expected. If a flawless finish is desired, it is recommended to apply a matching touch up paint ***
APPLICATION
All parts drawings illustrate only one application of each fitting. In most cases many other applications are possible. The channels shown in the illustrations are P1000, 15⁄8" square, except where noted otherwise. All 9⁄16" diameter holes use 1⁄2" x 15⁄16" hex head cap screws and 1⁄2" nuts – P1010, P3010, P4010 or P5510 – depending on the channel used. Nuts and bolts are not included with the fitting and must be ordered separately.
DESIGN BOLT TORQUE
Bolt Size | 1/4"-20 | 5/16"-18 | 3/8"-16 | 1/2"-13 | 5/8"-11 | 3/4"-10 |
Rec. Torque Ft/Lbs (N•m) |
6 (8) |
11 (15) |
19 (26) |
50 (68) |
100 (136) |
125 (170) |
Max Torque Ft/Lbs (N•m) |
7 (9) |
15 (20) |
25 (34) |
70 (95) |
125 (170) |
135 (183) |
SET SCREW TORQUE
Bolt Size | 1/4"-20 | 5/16"-18 | 3/8"-16 | 1/2"-13 | 5/8"-11 | 3/4"-10 |
Set Screw Torque In/Lbs (N•m) |
6 (8) |
11 (15) |
19 (26) |
50 (68) |
100 (136) |
125 (170) |
DIMENSIONS
Imperial dimensions are illustrated in inches. Metric dimensions are shown in parenthesis or as noted. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place.
DESIGN LOAD
Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5, unless otherwise noted.
BEAM CLAMPS
Clamps are designed to be used with W, M, S and HP Shape beams, Standard C and Miscellaneous MC Channels, Angles and Structural Tees. Clamps must be used in pairs mounted in opposite directions where indicated. For beam clamps with HG finish, standard hardware is EG finish. For optional stainless steel hardware, please contact the factory for availability.
Save paper! Download the most up to date version of Unistrut's General Engineering Catalog, right here, in digital format.
*Please note, catalog is in PDF format. You must have Adobe Reader (a FREE and trusted program) installed, to view. If you do not already have Adobe Reader installed, you may download it from Adobe's website. *Download times may vary, file is large.*