Pivot Joint GE F 160 - 80 HCP - SK115854 (Options: 5-1/2", For use with TP F 80 Beam Section)

The siFramo 80 Pivot Joint GE F 160 - 80 is applicable as a bracing element for single-arm cantilevers in conjunction with siFramo 100/160 section and for the knee-bracing reinforcing of all frame constructions. The pivot can be installed with angles from 25? to 155?. Pivot Joint GE F 100/160 comes with pre-assembled 100/160 joining plate. Attach Joints to the 160 mm face of Beam Section TP F 100/160 by means of 4 Self Forming Screws FLS F at the base plate. The support profile TP F 80 or TP F 100 (depending on joint type) plugged onto the octagon is also attached by means of 4 Self Forming Screws, so 8 Self Forming Screws are necessary in total. The cutting length of the support profile can be determined by the technical data table. After installation at the desired angle, the screws have to be tightened with 40 Nm.