P1836-EG Unistrut P2950 Trolley Tie, Design Load 1200 Lbs, Electro-Galvanized

Sku:

P1836-EG

UOM: EA

Product Details

Hoists: Allowable load: 1200 lbs. each*
With a 1200 lb. maximum load, the Unistrut trolley system is a great solution for any hoist applications ranging from light to heavy duty. For powered hoists, this can be paired with our festoon products to easily manage large cables. Heavier duty loads can utilize the P1836 trolley tie to double the allowable capacity of the system compared to a single P2950. Connection Hardware NOT Included

Applications:
• Warehouse storage movement
• Garage hoists

Portable Lifting and Moving Structures: Allowable load: 1200 lbs. each*
Combining a Unistrut frame with trolleys allows you to create portable structures that can be used to easily lift and move heavy items from one place to another.

Applications:
• Gantry cranes (Pictured)
• Temporary/collapsible lifting structures

* Based on allowable load for trolleys, actual allowable load may be determined by the allowable load of other strut/fittings.With a 1200 lb. maximum load, the Unistrut trolley system is a great solution for any hoist applications ranging from light to heavy duty. For powered hoists, this can be paired with our festoon products to easily manage large cables. Heavier duty loads can utilize the P1836 trolley tie to double the allowable capacity of the system compared to a single P2950.

Unistrut® is proud to have expanded the current trolley system to include 6 new trolley products!  The newly expoanded Unistrut Trolley System now covers a much larger range of applications, allowing us to become your single source for both trolley and support systems.

P1835 – Clevis Fitting
P1836 – Trolley Tie
P1837 – Mid-Stop Removable Brake Assembly
P1838 – Quiet End Stop
P1839 – Cable Festoon
P1840 – Trolley Track Splice Plate

FEATURES AND BENEFITS

Easy and customizable trolley systems
• Customize the optimal design for any application
• Application templates are available to make it quick and easy for the designer
• Connect the trolley system to any Unistrut system for additional customizability

High capacity and smooth operation
• The system can support heavy, medium, and light loads
• Smooth and reliable movements with self-cleaning bearings
• Quiet movement and stopping options available

Curved Track Available


Unistrut Buffalo is a division of Eberl Iron Works, Inc.

 

     

More Information
SKU P1836-EG
Pack Size Each
UOM EA
Brand Unistrut

STANDARD DIMENSIONS

Standard Dimensions for 1-5/8" (41.3 mm) width series channel (Unless otherwise specified in Unistrut General Engineering Catalog):

Hole Diameter: 9/16" (14.3 mm)

Hole Spacing - From End: 13/16" (20.6 mm)

Hole Spacing - On Center: 1-7/8" (47.6 mm)

Width: 1-5/8" (41.3 mm)

Thickness: 1/4" (6.4 mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

Note: When used for mechanical supports, load capacities of brackets, fittings and other supporting elements should be in compliance with the American Standard Code for Pressure Piping. Clamps are designed to be used with W, M, S & HP Shape beams, Standard C & Misc. MC Channels, Angles & Structural Tees. Clamps must be used in pairs where indicated. For beam clamps with HG finish, standard hardware is EG finish. For optional stainless steel hardware, please contact the factory for availability.

MATERIAL

Fittings, unless noted, are made from hot-rolled, pickled and oiled steel plates, bar, strip or coil, and conform to one or more of the following specifications: ASTM specifications A575, A576, A635, A1011 SS GR 33, A1011 HSLAS GR 45 or A36. All fittings meet or exceed physical properties of ASTM A1011 GR 33. The pickling of the steel produces a smooth surface free from scale. Many fittings are also available in stainless steel, aluminum and fiberglass. Consult factory for ordering information.

FINISHES

Fittings are available in:

  • Green Powder Coat (GR), conforming to commercial standards for Powder Coating
  • Electro-galvanized (EG), conforming to ASTM B633 Type III SC1
  • Hot-dipped galvanized (HG), conforming to ASTM A123 or A153
  • Plain (PL)
  • Unistrut Defender (DF), conforming to ASTM A1059 or A1046

*** Perma Green finish is a commercial grade finish, and as such scuffs and scratch marks are to be expected. If a flawless finish is desired, it is recommended to apply a matching touch up paint ***

APPLICATION

All parts drawings illustrate only one application of each fitting. In most cases many other applications are possible. The channels shown in the illustrations are P1000, 15⁄8" square, except where noted otherwise. All 9⁄16" diameter holes use 1⁄2" x 15⁄16" hex head cap screws and 1⁄2" nuts – P1010, P3010, P4010 or P5510 – depending on the channel used. Nuts and bolts are not included with the fitting and must be ordered separately.

DESIGN BOLT TORQUE

Bolt Size 1/4"-20 5/16"-18 3/8"-16 1/2"-13 5/8"-11 3/4"-10

Rec. Torque

Ft/Lbs (N•m)

6

(8)

11

(15)

 19

(26)

50

(68) 

100

(136)

125

(170)

Max Torque

Ft/Lbs (N•m)

7

(9)

 15

(20)

25

(34)

70

(95)

125

(170)

135

(183)

 
SET SCREW TORQUE

Bolt Size 1/4"-20 5/16"-18 3/8"-16 1/2"-13 5/8"-11 3/4"-10

Set Screw Torque

In/Lbs (N•m)

6

(8)

11

(15)

 19

(26)

50

(68) 

100

(136)

125

(170)


DIMENSIONS

Imperial dimensions are illustrated in inches. Metric dimensions are shown in parenthesis or as noted. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place.

DESIGN LOAD

Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5, unless otherwise noted.

BEAM CLAMPS

Clamps are designed to be used with W, M, S and HP Shape beams, Standard C and Miscellaneous MC Channels, Angles and Structural Tees. Clamps must be used in pairs mounted in opposite directions where indicated. For beam clamps with HG finish, standard hardware is EG finish. For optional stainless steel hardware, please contact the factory for availability.

Get your free copy of the Unistrut No. 17 General Engineering Catalog

Save paper! Download the most up to date version of Unistrut's General Engineering Catalog, right here, in digital format.

  • Unistrut Part Numbers
  • Product specifications
  • Engineering Data
  • Load Tables
  • Product Finish Information,
  • and more!
Unistrut-Catalog-17

*Please note, catalog is in PDF format. You must have Adobe Reader (a FREE and trusted program) installed, to view. If you do not already have Adobe Reader installed, you may download it from Adobe's website. *Download times may vary, file is large.*

Save paper! Download the most up to date version of Unistrut's General Engineering Catalog, right here, in digital format.

Write Your Own Review
You're reviewing:P1836-EG Unistrut P2950 Trolley Tie, Design Load 1200 Lbs, Electro-Galvanized