Unistrut P5500T 1-5/8'' x 2-7/16'' Slotted Channel, 12 Gauge

Sku:

P5500T

UOM: LGT

Product Details

Unistrut's P5500T is commonly used for trapeze supports, seismic bracing, ceiling grids, pipe, conduit, duct and cable tray supports, racks, and other general framing. For application examples, refer to our Application Showcase. The slotted material allows for adjustability and doesn't compromise too much on material strength. It has 85% of the capacity of the solid version of the profile. Product dimensions are 1 5/8" wide x 2 7/16" tall x 12 ga. thick. Slots are sized for a 1/2" threaded rod or fastener. Our P5000T is available in Pre-Galvanized (PG), Hot-Dip Galvanized (HG), Plain (PL), Green (GR), ZInc Dichromate (ZD) and Aluminum (EA).


Unistrut Buffalo is a division of Eberl Iron Works, Inc.

 

     

More Information
Pricing SKU P5500T-10PG
SKU P5500T
Pack Size Length
UOM LGT
Brand Unistrut

MATERIAL

Unistrut channels are accurately and carefully cold formed to size from low-carbon strip steel.

All spot-welded combination members, except P1001T, are welded 3" (76 mm) maximum on center.

STEEL: PLAIN

12 Ga. (2.7 mm), 14 Ga.(1.9 mm) and
16 Ga. (1.5 mm) ASTM A1011 SS GR 33

STEEL: PRE-GALVANIZED

12 Ga. (2.7 mm), 14 Ga. (1.9 mm) and
16 Ga. (1.5mm) ASTM A653 GR 33

For other materials, see Special Metals or Fiberglass sections.

FINISHES

All channels are available in:

  • Perma Green III (GR)
  • Pre-galvanized (PG), conforming to ASTM A653 G90
  • Hot-dipped galvanized (HG), conforming to ASTM A123
  • Plain (PL)
  • Unistrut Defender™ (DF), conforming to ASTM A1046

*** Perma Green finish is a commercial grade finish, and as such scuffs and scratch marks are to be expected. If a flawless finish is desired, it is recommended to apply a matching touch up paint ***

DIMENSIONS

Imperial dimensions are illustrated in inches. Metric dimensions are shown in millimeters and rounded to one decimal place.

STANDARD LENGTHS

Standard lengths are 10 feet (3.05m) and 20 feet (6.10m). Tolerances are ±1⁄8" (3 mm). Special lengths are available for a small cutting charge with a tolerance of ±1⁄8" (3 mm).

CURVED CHANNEL

Contact your local Unistrut Service Center or Unistrut Corporation for more information.

LOAD DATA

All beam and column load data pertains to carbon steel and stainless steel channels. Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD. Loads are based on 33 ksi steel cold formed to 42 ksi.

Type of Load Safety Factor to Yield Strength Safety Factor to Ultimate Strength
Beam Loads 1.67 2.0
Column Loads 1.80 2.2

P5500 - BEAM LOADING

Uniform Loading at Deflection
Span (In) Max Allowable Uniform Load (Lbs) Deflection at Uniform Load (In) Span/180 (Lbs) Span/240 (Lbs) Span/360 (Lbs)
24 3270 0.04 3270 3270 3270
36 2180 0.09 2180 2180 2180
48 1640 0.15 1640 1640 1420
60 1310 0.24 1310 1310 910
72 1090 0.34 1090 950 630
84 940 0.47 930 700 470
96 820 0.61 710 530 360
108 730 0.78 560 420 280
120 650 0.95 460 340 230
144 550 1.39 320 240 160
168 470 1.89 230 170 120
192 410 2.46 180 130 90
216 360 3.07 140 110 70
240 330 3.86 110 90 60

 

P5500 - COLUMN LOADING

Maximum Column Load Applied at C.G.
Unbraced Height (In) Max Allowable Load at Slot Face (Lbs) K = 0.65
(Lbs)
K = 0.80
(Lbs)
K = 1.0
(Lbs)
K = 1.2
(Lbs)
24 4640 13840 12570 10840 9190
36 3970 11050 9190 7030 5370
48 3180 8420 6390 4620 3630
60 2550 6250 4620 3450 2780
72 2120 4790 3630 2780 2260
84 1820 3890 3010 2330 1910
96 1580 3290 2580 2020 1650
108 1400 2860 2260 1770 1440
120 1270 2530 2020 1580 ** 
144 1060 2070 1650 **  ** 
168 920 1750 1380 **  ** 

 

Notes:
* Load limited by spot weld shear.
** KL⁄r > 200
NR = Not Recommended.
1. Beam loads are given in total uniform load (W Lbs) not uniform load (w lbs/ft or
w lbs/in).
2. Beam loads are based on a simple span and assumed to be adequately laterally
braced. Unbraced spans can reduce beam load carrying capacity. Refer to Page 62
for reduction factors for unbraced lengths.
3. For pierced channel, multiply beam loads by the following factor:
"KO" Series........95%    "T" Series...........85%
"HS" Series........90%    "SL" Series.........85%
"H3" Series.........90%   "DS" Series........70%
"WT" Series........85%
4. Deduct channel weight from the beam loads.
5. For concentrated midspan point loads, multiply beam loads by 50% and the
corresponding deflection by 80%. For other load conditions refer to page 18.
6. All beam loads are for bending about Axis 1-1.
Parameter P5500 P5501
Area of Section 0.726 In² 1.452 In²
Axis 1-1          
  Moments of Inertia (I) 0.522 In⁴ 2.805 In⁴
  Section Modulus (S) 0.390 In³ 1.151 In³
  Rdius of Gyration (r) 0.848 In 1.390 In
Axis 2-2          
  Moments of Inertia (I) 0.334  In⁴ 0.669 In⁴
  Section Modulus (S) 0.411  In³ 0.823 In³
  Rdius of Gyration (r) 0.679  In 0.679 In

Get your free copy of the Unistrut No. 17 General Engineering Catalog

Save paper! Download the most up to date version of Unistrut's General Engineering Catalog, right here, in digital format.

  • Unistrut Part Numbers
  • Product specifications
  • Engineering Data
  • Load Tables
  • Product Finish Information,
  • and more!
Unistrut-Catalog-17

*Please note, catalog is in PDF format. You must have Adobe Reader (a FREE and trusted program) installed, to view. If you do not already have Adobe Reader installed, you may download it from Adobe's website. *Download times may vary, file is large.*

Save paper! Download the most up to date version of Unistrut's General Engineering Catalog, right here, in digital format.

Write Your Own Review
You're reviewing:Unistrut P5500T 1-5/8'' x 2-7/16'' Slotted Channel, 12 Gauge